Broadcast Electronics

Broadcast Electronics

Registered User Login
Chinese
English
Portuguese
Spanish
Support

Technical Specifications

 

4MX 50 - Technical Specifications

Sep 20, 2017

RF Specs

Output Power:
Range250 W to 55.0 kW
Accuracy±2%
Efficiency87% at 50 kW RF output; 88% typical
VSWR1.2:1 or better at rated power
Impedance50 Ohm
Frequency:
Range531 kHz to 1700 kHz, supplied on frequency, as ordered; 9 kHz or 10 kHz channel spacing
Stability±2.5ppm, 0 to 50° C
Spurious & Harmonic80 dB; Meets or exceeds FCC and other world standards
Modulation:
TypePatented 4M Modulation
Capabilities>145% peak positive capability at 55 kW output power into 50 Ohm load
Carrier Shift<1% at 95% negative modulation at 1 kHz
RegulatoryMeets or exceeds FCC and DOC technical requirements,meets ENG0215 safety requirements

AM Audio Specs (All audio specifications are at rated power)

Analog:
ModesMono, HD Radio with external ASi 10
Connector TypeTerminal block
Input Level-10 dBm to +10 dBm; electronically adjustable
Impedance600 Ohm, balanced
Amplitude Response+0.1/-0.25 dB; 20 Hz to 10 kHz
THD + Noise0.5% or less; 20 Hz to 10 kHz
Intermodulation Distortion0.5% or less; 1:1 ratio
Transient Intermodulation Distortion0.5% or less; 4:1 ratio
Incidental Phase Modulation40 dB @ 1 kHz
Signal to Noise Ratio-70 dB or better
Squarewave Overshoot0.1% or less at 400 Hz
Squarewave Tilt0.5% or less at 40 Hz
AES:
ModesMono L+R, HD Radio with external ASi 10
Connector TypeTerminal block
Input Level0 dBFS to -20 dBFS; electronically adjustable
Impedance110 Ohm, balanced
Amplitude Response+0.1/-0.25 dB; 20 Hz to 10 kHz
THD + Noise0.5% or less; 20 hz to 10 kHz
Intermodulation Distortion0.5% or less; 1:1 ratio
Transient Intermodulation Distortion0.5% or less; 4:1 ratio
Incidental Phase Modulation40 dB @ 1kHz
Signal to Noise Ratio-70 dB or better
Squarewave Overshoot0.1% or less at 400 Hz
Squarewave Tilt0.5% or less at 40 Hz

Mechanical & Physical

Size/Unpacked45" W x 35" D x 87" H
Weight/Unpacked1115 lbs (506 kg)
Cooling Air RequirementsFiltered air inlet at lower rear of cabinet, 3000 ft³/min (85.0 m³/min)
Air OutletAir exhaust at top of cabinet
Heat Dissipation:
@ 55 kW, 0% modulation6.8 kW (23,208 BTU/hr)
@ 55 kW, 100% tone modulation10.2 kW (34,813 BTU/hr)
Air Conditioning Sizing:
@ 55 kW, 100% Tone Modulation2.90 ton
RF Output Connector3-1/8" EIA Flange, 50 Ohm

Environmental

Temperature0° to 50° C
Altitude10,000 ft (3,048 M)
Humidity0% to 95% (non-condensing)

Electrical

AC Input Voltage:
3-Phase Closed Delta230 VAC (192-265 VAC), 50/60 Hz
3-Phase WYE 3 Wire230 VAC (192-265 VAC), 50/60 Hz
3-Phase WYE 4 Wire400 VAC (332-460 VAC), 50/60 Hz
Disconnect Size
@ 230 VAC, 55 kW, 100% Tone Modulation250 A (see Installation Notes Figure 1)
@ 400 VAC, 55 kW, 100% Tone Modulation150 A (see Installation Notes Figure 1)
AC Wire Size:
@ 230 VAC, 55 kW, 100% Tone Modulation250 KCMIL - 350 KCMIL (see Installation Notes Figure 1)
@ 400 VAC, 55 kW, 100% Tone Modulation2/0 AWG - 3/0 AWG(see Installation Notes Figure 1)
Current Draw:
@ 230 VAC (192-265 VAC) input, 55 kW, 100% Tone Modulation240 A per phase (see Installation Notes Figure 1)
@ 400 VAC (332-460 VAC) input, 55 kW, 100% Tone Modulation138 A per phase (see Installation Notes Figure 1)
AC Power Consumption:
@ 50 kW RF Output Power, 0% Modulation56.8 kW
@ 75 kW RF Output Power, 100% Tone Modulation85.2 kW
Power Factor0.99 or better at full load
Surge ProtectionExternal surge suppresor supplied

All Specifications Subject to Change Without Notice


Click to Download Technical Specs (PDF)

Related Products

4MX 50 (D) Discontinued

 

Contact Us

 

phone: +1 217.224.9600

email: